Skip to content
IMPACTFEES.ORG

Darlington, South Carolina Impact Fees

Darlington applies its own fee schedule. Darlington County does not currently add county-level impact fees inside city limits. A new single-family home pays $2,600.00 per unit (rates sourced ). The full breakdown is below.

Darlington Impact Fees by Project Type

Darlington: Single-Family Impact Fees

A new single-family home in Darlington pays $2,600.00 per unit in impact fees (rates sourced November 5, 2026). Every line item is levied at the municipal or utility level.

The largest line items are Sewer Tap Fee (City of Darlington) ($1,600.00) and Water Tap Fee (City of Darlington) ($1,000.00).

Some fees are tiered by unit size or building type; amounts reflect the representative tier noted in the schedule below.

View the Full Darlington Impact Fee Schedule
Water$1,000.00
  • Water Tap Fee (City of Darlington)
    3/4" tap, 1-2 units
    City of Darlington Water & Sewer Department
    The City of Darlington charges a one-time water tap fee of $1,000 for a 3/4 inch tap serving one or two units inside the city, under its 2023-2024 rate schedule. A service charge and inspection fees are billed separately. Taps over 2 inches are billed at the cost of labor and material plus 30 percent.
    $1,000.00
Sewer$1,600.00
  • Sewer Tap Fee (City of Darlington)
    4" tap, under 8 ft deep
    City of Darlington Water & Sewer Department
    The City of Darlington charges a one-time sewer tap fee for a 4 inch tap inside the city: $1,600 when the line is less than 8 feet deep and $2,500 when deeper, under its 2023-2024 rate schedule. A 6 inch tap is billed at cost plus 30 percent. Service charge and inspection fees are extra.
    $1,600.00
City$0.00
County$0.00
Total (Darlington): $2,600.00
Sources last checked Official fee schedules:City of Darlington Water & Sewer Department City of Darlington Darlington County

Where in Darlington County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Darlington: Multifamily Impact Fees

A new multifamily unit in Darlington pays $2,600.00 per unit in impact fees (rates sourced November 5, 2026). Every line item is levied at the municipal or utility level.

The largest line items are Sewer Tap Fee (City of Darlington, MF) ($1,600.00) and Water Tap Fee (City of Darlington, MF) ($1,000.00).

Some fees are tiered by unit size or building type; amounts reflect the representative tier noted in the schedule below.

View the Full Darlington Impact Fee Schedule
Water$1,000.00
  • Water Tap Fee (City of Darlington, MF)
    3/4" tap, 1-2 units
    City of Darlington Water & Sewer Department
    The City of Darlington charges its water tap fee per tap, not per dwelling unit, under its 2023-2024 rate schedule: a 3/4 inch tap for one or two units is $1,000 inside the city, a 1 inch tap for 3 to 5 units is $1,100, and a 1 inch tap for 6 to 24 units is $2,000; taps over 2 inches are billed at cost plus 30 percent. A building served by one connection pays once. Each unit on a shared meter also pays the monthly administrative charge.
    $1,000.00
Sewer$1,600.00
  • Sewer Tap Fee (City of Darlington, MF)
    4" tap, under 8 ft deep
    City of Darlington Water & Sewer Department
    The City of Darlington charges a one-time sewer tap fee per tap, not per unit: $1,600 for a 4 inch tap less than 8 feet deep inside the city and $2,500 when deeper, under its 2023-2024 rate schedule. A building served by one connection pays once. A 6 inch tap is billed at cost plus 30 percent.
    $1,600.00
City$0.00
Total (Darlington): $2,600.00
Sources last checked Official fee schedules:City of Darlington Water & Sewer Department City of Darlington Darlington County

Where in Darlington County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Darlington: Commercial Impact Fees

Commercial development in Darlington pays no per-square-foot impact fees, but owes $2,700.00 in one-time water and sewer connection fees (rates sourced November 5, 2026).

For a 50,000 sq ft building, that comes to about $2,700.00. The calculator below adjusts to your exact square footage.

The largest line items are Sewer Tap Fee (City of Darlington) — 4" less than 8 ft deep ($1,600.00 one-time) and Water Tap Fee (City of Darlington) — 1" tap, 3-5 units ($1,100.00 one-time).

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

View the Full Darlington Impact Fee Schedule
Water$1,100.00 one-time
  • Water Tap Fee (City of Darlington) — 1" tap, 3-5 units
    1", 3-5 units
    City of Darlington Water & Sewer Department
    Inside-city 1 inch water tap for a service of 3 to 5 units, under the city's 2023-2024 rate schedule. The outside-city rate is $2,000. Service charge and inspection fees are extra.
    $1,100.00 one-time
Sewer$1,600.00 one-time
  • Sewer Tap Fee (City of Darlington) — 4" less than 8 ft deep
    4" (<8 ft deep)
    City of Darlington Water & Sewer Department
    Inside-city 4" sewer tap less than 8 ft deep. Deeper 4" taps (>8 ft) cost $2,500; outside-city rates are $3,000 / $4,500. 6" taps billed at actual cost of labor & material plus 30% (inside) / 50% (outside). Effective FY2023-2024 (current).
    $1,600.00 one-time
City$0.00
County$0.00
Total (Darlington): $2,700.00 one-time (≈ $2,700.00 at 50,000 sq ft)
Sources last checked Official fee schedules:City of Darlington Water & Sewer Department City of Darlington Darlington County
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Darlington County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Darlington: Industrial Impact Fees

Industrial development in Darlington pays no per-square-foot impact fees, but owes $2,700.00 in one-time water and sewer connection fees (rates sourced November 5, 2026).

For a 50,000 sq ft building, that comes to about $2,700.00. The calculator below adjusts to your exact square footage.

The largest line items are Sewer Tap Fee (City of Darlington) — 4" less than 8 ft deep ($1,600.00 one-time) and Water Tap Fee (City of Darlington) — 1" tap, 3-5 units ($1,100.00 one-time).

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

View the Full Darlington Impact Fee Schedule
Water$1,100.00 one-time
  • Water Tap Fee (City of Darlington) — 1" tap, 3-5 units
    1", 3-5 units
    City of Darlington Water & Sewer Department
    Inside-city 1 inch water tap for a service of 3 to 5 units, under the city's 2023-2024 rate schedule. The outside-city rate is $2,000. Service charge and inspection fees are extra.
    $1,100.00 one-time
Sewer$1,600.00 one-time
  • Sewer Tap Fee (City of Darlington) — 4" less than 8 ft deep
    4" (<8 ft deep)
    City of Darlington Water & Sewer Department
    Inside-city 4" sewer tap less than 8 ft deep. Deeper 4" taps (>8 ft) cost $2,500; outside-city rates are $3,000 / $4,500. 6" taps billed at actual cost of labor & material plus 30% (inside) / 50% (outside). Effective FY2023-2024 (current).
    $1,600.00 one-time
City$0.00
County$0.00
Total (Darlington): $2,700.00 one-time (≈ $2,700.00 at 50,000 sq ft)
Sources last checked Official fee schedules:City of Darlington Water & Sewer Department City of Darlington Darlington County
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Darlington County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Darlington: Office Impact Fees

Office development in Darlington pays no per-square-foot impact fees, but owes $2,700.00 in one-time water and sewer connection fees (rates sourced November 5, 2026).

For a 25,000 sq ft building, that comes to about $2,700.00. The calculator below adjusts to your exact square footage.

The largest line items are Sewer Tap Fee (City of Darlington) — 4" less than 8 ft deep ($1,600.00 one-time) and Water Tap Fee (City of Darlington) — 1" tap, 3-5 units ($1,100.00 one-time).

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

View the Full Darlington Impact Fee Schedule
Water$1,100.00 one-time
  • Water Tap Fee (City of Darlington) — 1" tap, 3-5 units
    1", 3-5 units
    City of Darlington Water & Sewer Department
    Inside-city 1 inch water tap for a service of 3 to 5 units, under the city's 2023-2024 rate schedule. The outside-city rate is $2,000. Service charge and inspection fees are extra.
    $1,100.00 one-time
Sewer$1,600.00 one-time
  • Sewer Tap Fee (City of Darlington) — 4" less than 8 ft deep
    4" (<8 ft deep)
    City of Darlington Water & Sewer Department
    Inside-city 4" sewer tap less than 8 ft deep. Deeper 4" taps (>8 ft) cost $2,500; outside-city rates are $3,000 / $4,500. 6" taps billed at actual cost of labor & material plus 30% (inside) / 50% (outside). Effective FY2023-2024 (current).
    $1,600.00 one-time
City$0.00
County$0.00
Total (Darlington): $2,700.00 one-time (≈ $2,700.00 at 25,000 sq ft)
Sources last checked Official fee schedules:City of Darlington Water & Sewer Department City of Darlington Darlington County
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Darlington County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 25,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Darlington Impact Fee Calculator

Estimate impact fees for your project. Set to single-family. Drop a pin or search an address for site-specific fees.

Location

Select a location to begin

Once you select an address or drop a pin, we'll identify the responsible city and county and generate a fee breakdown.

Water & Sewer
Transportation
Parks
Schools
Fire & Police
General

How Development Impact Fees Work in South Carolina

South Carolina counties and municipalities assess development impact fees under the Development Impact Fee Act (S.C. Code 6-1-910 et seq.). Only a government with a comprehensive plan (or a capital improvements plan that substantially complies with the Act) may impose one, by an ordinance approved by a positive majority, and before charging residential units it must report how the fee affects the availability of affordable housing.

Fees may fund only the public facilities the Act lists: water and wastewater, solid waste, roads and bridges, stormwater and flood control, public safety (law enforcement, fire, emergency medical and street lighting), capital equipment and vehicles of at least $100,000 a unit, parks, libraries and recreation, and, since 2016, K-12 public school facilities. A fee may not exceed the development's proportionate share of the cost, after credits for land, money or improvements the developer contributes and for other funding sources.

Fee revenue is kept in interest-bearing accounts by category and service area and spent only on that category in that area. A fee not spent within three years of the date it was scheduled to be spent, or paid on a building permit that is denied, is refunded with its share of interest. The fee is due no earlier than the building permit (or the development permit where no building permit is needed).

Water and sewer charges usually come from the utility that serves a parcel: the Act's definition of an impact fee excludes connection or hookup charges, and a water or wastewater provider meeting the conditions of 6-1-1080 sets its impact fees outside the Act. That is why totals differ between a city, its neighbors and the unincorporated county around it.

For a primer on how impact fees work, see our plain-English guide.

Summary current as of November 2026. This is an editorial summary, not legal advice; see the official statute text and our terms of use.

Darlington Impact Fee FAQs

What are the total impact fees for a single-family home in Darlington, South Carolina?

A new single-family home in Darlington pays $2,600.00 per unit in combined impact fees (rates sourced November 5, 2026).

How much are commercial impact fees in Darlington?

Commercial development in Darlington pays no per-square-foot impact fees, but owes $2,700.00 in one-time water and sewer connection fees (assuming a 1-inch meter).

Does Darlington charge its own impact fees?

Yes. Darlington levies its own municipal impact or utility fees. Darlington County does not currently add county-level impact fees inside Darlington. The schedule on this page shows every fee that applies to development in Darlington.

Can a South Carolina impact fee be raised after it is adopted?

Only through a new ordinance. Under S.C. Code 6-1-940 the government is bound by the amount its impact fee ordinance sets for each unit of development and may not charge higher or additional impact fees for the same purpose unless the project's service units increase or its scope changes, and then only for the added share. Water and sewer capacity and tap fees set by utilities follow each provider's own rate process.

Fee amounts on this page are compiled from official published schedules and are provided for planning purposes only. Rates change, and project specifics (unit size, meter size, location within special districts) can alter what applies. Always verify current fees with the jurisdiction and utility before relying on them.

Compare unincorporated rates and every other city on the Darlington County impact fees page.

Missing a jurisdiction? Get in touch.

Request coverage for a city or county, report an issue, ask about enterprise access, or inquire about sponsorship opportunities. We typically reply within one business day.

0/1000