Skip to content
IMPACTFEES.ORG

Dillon, South Carolina Impact Fees

Dillon applies its own fee schedule. Dillon County does not currently add county-level impact fees inside city limits. A new single-family home pays $1,100.00 per unit (rates sourced ). The full breakdown is below.

Dillon Impact Fees by Project Type

Dillon: Single-Family Impact Fees

A new single-family home in Dillon pays $1,100.00 per unit in impact fees (rates sourced November 5, 2026). Every line item is levied at the municipal or utility level.

The largest line items are Sewer Tap-In Fee (City of Dillon) ($550.00) and Water Tap-In Fee (City of Dillon) ($550.00).

View the Full Dillon Impact Fee Schedule
Water$550.00
  • Water Tap-In Fee (City of Dillon)
    City of Dillon Water & Wastewater Department
    Charged per single-family connection, separate from the sewer tap-in fee. Due when the building or zoning permit is issued. A $400 construction cost is added where the tap is made on a line the city built. Churches are exempt.
    $550.00
Sewer$550.00
  • Sewer Tap-In Fee (City of Dillon)
    City of Dillon Water & Wastewater Department
    Charged per single-family connection, separate from the water tap-in fee. Due when the building or zoning permit is issued. A $400 construction cost is added where the tap is made on a line the city built. Churches are exempt.
    $550.00
Total (Dillon): $1,100.00
Sources last checked Official fee schedules:City of Dillon Water & Wastewater Department City of Dillon Dillon County

Where in Dillon County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Dillon: Multifamily Impact Fees

A new multifamily unit in Dillon pays $1,100.00 per unit in impact fees (rates sourced November 5, 2026). Every line item is levied at the municipal or utility level.

The largest line items are Sewer Tap-In Fee (City of Dillon, MF) ($550.00) and Water Tap-In Fee (City of Dillon, MF) ($550.00).

View the Full Dillon Impact Fee Schedule
Water$550.00
  • Water Tap-In Fee (City of Dillon, MF)
    City of Dillon Water & Wastewater Department
    Charged for each dwelling unit, separate from the sewer tap-in fee. Due when the building or zoning permit is issued. A $400 construction cost is added where the tap is made on a line the city built.
    $550.00
Sewer$550.00
  • Sewer Tap-In Fee (City of Dillon, MF)
    City of Dillon Water & Wastewater Department
    Charged for each dwelling unit, separate from the water tap-in fee. Due when the building or zoning permit is issued. A $400 construction cost is added where the tap is made on a line the city built.
    $550.00
Total (Dillon): $1,100.00
Sources last checked Official fee schedules:City of Dillon Water & Wastewater Department City of Dillon Dillon County

Where in Dillon County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Dillon: Commercial Impact Fees

Commercial development in Dillon pays no per-square-foot impact fees, but owes $3,900.00 in one-time water and sewer connection fees (rates sourced November 5, 2026).

For a 50,000 sq ft building, that comes to about $3,900.00. The calculator below adjusts to your exact square footage.

The largest line items are Water Service Installation Charge (City of Dillon) — 1" meter ($1,300.00 one-time), Sewer Service Installation Charge (City of Dillon) — 1" meter ($1,300.00 one-time) and Water Connection Fee (City of Dillon) — 1" meter ($650.00 one-time).

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

View the Full Dillon Impact Fee Schedule
Water$1,950.00 one-time
  • Water Service Installation Charge (City of Dillon) — 1" meter
    City of Dillon
    Where the city runs water service to the property line of a commercial business inside city limits, it charges this fixed cost in addition to the connection fee (3/4" $1,100, 1" $1,300, 2" $2,400), provided the work needs no grinder pump or road cut. Otherwise the owner's private contractor makes the tap.
    $1,300.00 one-time
  • Water Connection Fee (City of Dillon) — 1" meter
    City of Dillon
    In-town nonresidential water connection (tap-in) fee by meter size, due when the building or zoning permit is issued. Out-of-town rates are higher (1" meter $850 vs $650 in-town; full out-of-town ladder applies). Fire-sprinkler meters $0. Rates per Ord. 10-15 (2011).
    $650.00 one-time
Sewer$1,950.00 one-time
  • Sewer Service Installation Charge (City of Dillon) — 1" meter
    City of Dillon
    Where the city runs sewer service to the property line of a commercial business inside city limits, it charges this fixed cost in addition to the connection fee (3/4" $1,100, 1" $1,300, 2" $2,400), provided the work needs no grinder pump or road cut. Otherwise the owner's private contractor makes the tap.
    $1,300.00 one-time
  • Sewer Connection Fee (City of Dillon) — 1" meter
    City of Dillon
    In-town nonresidential sewer connection (tap-in) fee by meter size, due when the building or zoning permit is issued. Out-of-town rates are higher (1" meter $850 vs $650 in-town; full out-of-town ladder applies). Fire-sprinkler meters $0. Rates per Ord. 10-15 (2011).
    $650.00 one-time
City$0.00
County$0.00
Total (Dillon): $3,900.00 one-time (≈ $3,900.00 at 50,000 sq ft)
Sources last checked Official fee schedules:City of Dillon Dillon County
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Dillon County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Dillon: Industrial Impact Fees

Industrial development in Dillon pays no per-square-foot impact fees, but owes $3,900.00 in one-time water and sewer connection fees (rates sourced November 5, 2026).

For a 50,000 sq ft building, that comes to about $3,900.00. The calculator below adjusts to your exact square footage.

The largest line items are Water Service Installation Charge (City of Dillon) — 1" meter ($1,300.00 one-time), Sewer Service Installation Charge (City of Dillon) — 1" meter ($1,300.00 one-time) and Water Connection Fee (City of Dillon) — 1" meter ($650.00 one-time).

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

View the Full Dillon Impact Fee Schedule
Water$1,950.00 one-time
  • Water Service Installation Charge (City of Dillon) — 1" meter
    City of Dillon
    Where the city runs water service to the property line of a commercial business inside city limits, it charges this fixed cost in addition to the connection fee (3/4" $1,100, 1" $1,300, 2" $2,400), provided the work needs no grinder pump or road cut. Otherwise the owner's private contractor makes the tap.
    $1,300.00 one-time
  • Water Connection Fee (City of Dillon) — 1" meter
    City of Dillon
    In-town nonresidential water connection (tap-in) fee by meter size, due when the building or zoning permit is issued. Out-of-town rates are higher (1" meter $850 vs $650 in-town; full out-of-town ladder applies). Fire-sprinkler meters $0. Rates per Ord. 10-15 (2011).
    $650.00 one-time
Sewer$1,950.00 one-time
  • Sewer Service Installation Charge (City of Dillon) — 1" meter
    City of Dillon
    Where the city runs sewer service to the property line of a commercial business inside city limits, it charges this fixed cost in addition to the connection fee (3/4" $1,100, 1" $1,300, 2" $2,400), provided the work needs no grinder pump or road cut. Otherwise the owner's private contractor makes the tap.
    $1,300.00 one-time
  • Sewer Connection Fee (City of Dillon) — 1" meter
    City of Dillon
    In-town nonresidential sewer connection (tap-in) fee by meter size, due when the building or zoning permit is issued. Out-of-town rates are higher (1" meter $850 vs $650 in-town; full out-of-town ladder applies). Fire-sprinkler meters $0. Rates per Ord. 10-15 (2011).
    $650.00 one-time
City$0.00
County$0.00
Total (Dillon): $3,900.00 one-time (≈ $3,900.00 at 50,000 sq ft)
Sources last checked Official fee schedules:City of Dillon Dillon County
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Dillon County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Dillon: Office Impact Fees

Office development in Dillon pays no per-square-foot impact fees, but owes $3,900.00 in one-time water and sewer connection fees (rates sourced November 5, 2026).

For a 25,000 sq ft building, that comes to about $3,900.00. The calculator below adjusts to your exact square footage.

The largest line items are Water Service Installation Charge (City of Dillon) — 1" meter ($1,300.00 one-time), Sewer Service Installation Charge (City of Dillon) — 1" meter ($1,300.00 one-time) and Water Connection Fee (City of Dillon) — 1" meter ($650.00 one-time).

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

View the Full Dillon Impact Fee Schedule
Water$1,950.00 one-time
  • Water Service Installation Charge (City of Dillon) — 1" meter
    City of Dillon
    Where the city runs water service to the property line of a commercial business inside city limits, it charges this fixed cost in addition to the connection fee (3/4" $1,100, 1" $1,300, 2" $2,400), provided the work needs no grinder pump or road cut. Otherwise the owner's private contractor makes the tap.
    $1,300.00 one-time
  • Water Connection Fee (City of Dillon) — 1" meter
    City of Dillon
    In-town nonresidential water connection (tap-in) fee by meter size, due when the building or zoning permit is issued. Out-of-town rates are higher (1" meter $850 vs $650 in-town; full out-of-town ladder applies). Fire-sprinkler meters $0. Rates per Ord. 10-15 (2011).
    $650.00 one-time
Sewer$1,950.00 one-time
  • Sewer Service Installation Charge (City of Dillon) — 1" meter
    City of Dillon
    Where the city runs sewer service to the property line of a commercial business inside city limits, it charges this fixed cost in addition to the connection fee (3/4" $1,100, 1" $1,300, 2" $2,400), provided the work needs no grinder pump or road cut. Otherwise the owner's private contractor makes the tap.
    $1,300.00 one-time
  • Sewer Connection Fee (City of Dillon) — 1" meter
    City of Dillon
    In-town nonresidential sewer connection (tap-in) fee by meter size, due when the building or zoning permit is issued. Out-of-town rates are higher (1" meter $850 vs $650 in-town; full out-of-town ladder applies). Fire-sprinkler meters $0. Rates per Ord. 10-15 (2011).
    $650.00 one-time
City$0.00
County$0.00
Total (Dillon): $3,900.00 one-time (≈ $3,900.00 at 25,000 sq ft)
Sources last checked Official fee schedules:City of Dillon Dillon County
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Dillon County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 25,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Dillon Impact Fee Calculator

Estimate impact fees for your project. Set to single-family. Drop a pin or search an address for site-specific fees.

Location

Select a location to begin

Once you select an address or drop a pin, we'll identify the responsible city and county and generate a fee breakdown.

Water & Sewer
Transportation
Parks
Schools
Fire & Police
General

How Development Impact Fees Work in South Carolina

South Carolina counties and municipalities assess development impact fees under the Development Impact Fee Act (S.C. Code 6-1-910 et seq.). Only a government with a comprehensive plan (or a capital improvements plan that substantially complies with the Act) may impose one, by an ordinance approved by a positive majority, and before charging residential units it must report how the fee affects the availability of affordable housing.

Fees may fund only the public facilities the Act lists: water and wastewater, solid waste, roads and bridges, stormwater and flood control, public safety (law enforcement, fire, emergency medical and street lighting), capital equipment and vehicles of at least $100,000 a unit, parks, libraries and recreation, and, since 2016, K-12 public school facilities. A fee may not exceed the development's proportionate share of the cost, after credits for land, money or improvements the developer contributes and for other funding sources.

Fee revenue is kept in interest-bearing accounts by category and service area and spent only on that category in that area. A fee not spent within three years of the date it was scheduled to be spent, or paid on a building permit that is denied, is refunded with its share of interest. The fee is due no earlier than the building permit (or the development permit where no building permit is needed).

Water and sewer charges usually come from the utility that serves a parcel: the Act's definition of an impact fee excludes connection or hookup charges, and a water or wastewater provider meeting the conditions of 6-1-1080 sets its impact fees outside the Act. That is why totals differ between a city, its neighbors and the unincorporated county around it.

For a primer on how impact fees work, see our plain-English guide.

Summary current as of November 2026. This is an editorial summary, not legal advice; see the official statute text and our terms of use.

Dillon Impact Fee FAQs

What are the total impact fees for a single-family home in Dillon, South Carolina?

A new single-family home in Dillon pays $1,100.00 per unit in combined impact fees (rates sourced November 5, 2026).

How much are commercial impact fees in Dillon?

Commercial development in Dillon pays no per-square-foot impact fees, but owes $3,900.00 in one-time water and sewer connection fees (assuming a 1-inch meter).

Does Dillon charge its own impact fees?

Yes. Dillon levies its own municipal impact or utility fees. Dillon County does not currently add county-level impact fees inside Dillon. The schedule on this page shows every fee that applies to development in Dillon.

Can a South Carolina impact fee be raised after it is adopted?

Only through a new ordinance. Under S.C. Code 6-1-940 the government is bound by the amount its impact fee ordinance sets for each unit of development and may not charge higher or additional impact fees for the same purpose unless the project's service units increase or its scope changes, and then only for the added share. Water and sewer capacity and tap fees set by utilities follow each provider's own rate process.

Fee amounts on this page are compiled from official published schedules and are provided for planning purposes only. Rates change, and project specifics (unit size, meter size, location within special districts) can alter what applies. Always verify current fees with the jurisdiction and utility before relying on them.

Compare unincorporated rates and every other city on the Dillon County impact fees page.

Missing a jurisdiction? Get in touch.

Request coverage for a city or county, report an issue, ask about enterprise access, or inquire about sponsorship opportunities. We typically reply within one business day.

0/1000