Union Impact Fees by Project Type
Union: Single-Family Impact Fees
A new single-family home in Union pays $1,020.00 per unit in impact fees (rates sourced November 14, 2026). Every line item is levied at the municipal or utility level.
The largest line items are Water Tap Fee (City of Union) — 3/4" meter ($720.00) and Sewer Tap Fee (City of Union) ($300.00).
Some fees are tiered by unit size or building type; amounts reflect the representative tier noted in the schedule below.
View the Full Union Impact Fee Schedule
- Water Tap Fee (City of Union) — 3/4" meter$720.00City of UnionA new home connecting to City of Union water pays a one-time water tap fee by meter size: $720 for the standard 3/4-inch meter, $940 for 1 inch, $1,160 for 1.5 inch and $3,520 for 2 inch, in effect since July 1, 2023. The fee covers the tap and the service line to the street right-of-way. Inside the city the water system development fee is $0.
- Sewer Tap Fee (City of Union)$300.00City of UnionA new single-family home connecting to City of Union sewer pays a one-time sewer connection charge of $300. Multifamily buildings pay $300 for the first unit and $150 for each additional unit.
- Municipal Development Impact Fee (City of Union)$0.00City of Union
- $0.00
Where in Union County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Union: Multifamily Impact Fees
A new multifamily unit in Union pays $870.00 per unit in impact fees (rates sourced November 14, 2026). Every line item is levied at the municipal or utility level.
The largest line items are Water Tap Fee (City of Union, MF) — 3/4" meter ($720.00) and Sewer Tap Fee (City of Union, MF) ($150.00).
Some fees are tiered by unit size or building type; amounts reflect the representative tier noted in the schedule below.
View the Full Union Impact Fee Schedule
- Water Tap Fee (City of Union, MF) — 3/4" meter$720.00City of UnionThe City of Union charges a water tap fee for every meter installed and ordinarily requires a separate meter for each dwelling, so each separately metered unit pays the tap fee: $720 for a 3/4-inch meter, $940 for 1 inch, $1,160 for 1.5 inch and $3,520 for 2 inch, in effect since July 1, 2023. An apartment complex may instead be master metered, in which case the building pays once for its meter size; larger meters are quoted by the city.
- Sewer Tap Fee (City of Union, MF)$150.00City of UnionEach new multifamily unit connecting to City of Union sewer pays a one-time sewer connection charge of $150. The first unit in a building is charged $300.
- Municipal Development Impact Fee (City of Union, MF)$0.00City of Union
- $0.00
Where in Union County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Union: Commercial Impact Fees
Commercial development in Union pays no per-square-foot impact fees, but owes $1,440.00 in one-time water and sewer connection fees (rates sourced November 14, 2026).
For a 50,000 sq ft building, that comes to about $1,440.00. The calculator below adjusts to your exact square footage.
The largest line items are Water Tap Fee (City of Union) — 1" meter ($940.00 one-time) and Sewer Connection Fee (City of Union) ($500.00 one-time).
Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.
View the Full Union Impact Fee Schedule
- Water Tap Fee (City of Union) — 1" meter$940.00 one-timeCity of UnionWater tap fee by meter size, covering the tap and service line to the right-of-way, effective July 1, 2023. Meters above 2 inches are priced by quote. Outside-city customers must sign a water service agreement and restrictive covenant with the city.
- Water System Development Fee (City of Union) — inside city$0.00City of UnionThe water system development fee is $0 inside the city. Outside the city limits it is $1,400 per equivalent residential unit (300 gallons per day), in effect since fiscal year 2026.
- Sewer Connection Fee (City of Union)$500.00 one-timeCity of UnionCommercial, institutional and other nonresidential buildings pay a one-time sewer connection charge of $500 for the first fixture unit or less plus $5 for each additional fixture unit (International Plumbing Code fixture-unit tables), per connection, paid with the building permit. The amount shown is the minimum. Hotels and motels pay $300 for the first bath and $75 for each additional bath.
- Sewer System Development Fee (City of Union) — inside city$0.00City of UnionThe wastewater system development fee is $0 inside the city. Outside the city limits it is $2,800 per equivalent residential unit (300 gallons per day), in effect since fiscal year 2026.
- City Impact Fee (City of Union, Commercial)$0.00City of Union
- $0.00
Where in Union County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Union: Industrial Impact Fees
Industrial development in Union pays no per-square-foot impact fees, but owes $1,440.00 in one-time water and sewer connection fees (rates sourced November 14, 2026).
For a 50,000 sq ft building, that comes to about $1,440.00. The calculator below adjusts to your exact square footage.
The largest line items are Water Tap Fee (City of Union) — 1" meter ($940.00 one-time) and Sewer Connection Fee (City of Union) ($500.00 one-time).
Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.
View the Full Union Impact Fee Schedule
- Water Tap Fee (City of Union) — 1" meter$940.00 one-timeCity of UnionWater tap fee by meter size, covering the tap and service line to the right-of-way, effective July 1, 2023. Meters above 2 inches are priced by quote. Outside-city customers must sign a water service agreement and restrictive covenant with the city.
- Water System Development Fee (City of Union) — inside city$0.00City of UnionThe water system development fee is $0 inside the city. Outside the city limits it is $1,400 per equivalent residential unit (300 gallons per day), in effect since fiscal year 2026.
- Sewer Connection Fee (City of Union)$500.00 one-timeCity of UnionCommercial, institutional and other nonresidential buildings pay a one-time sewer connection charge of $500 for the first fixture unit or less plus $5 for each additional fixture unit (International Plumbing Code fixture-unit tables), per connection, paid with the building permit. The amount shown is the minimum. Hotels and motels pay $300 for the first bath and $75 for each additional bath.
- Sewer System Development Fee (City of Union) — inside city$0.00City of UnionThe wastewater system development fee is $0 inside the city. Outside the city limits it is $2,800 per equivalent residential unit (300 gallons per day), in effect since fiscal year 2026.
- City Impact Fee (City of Union, Industrial)$0.00City of Union
- $0.00
Where in Union County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Union: Office Impact Fees
Office development in Union pays no per-square-foot impact fees, but owes $1,440.00 in one-time water and sewer connection fees (rates sourced November 14, 2026).
For a 25,000 sq ft building, that comes to about $1,440.00. The calculator below adjusts to your exact square footage.
The largest line items are Water Tap Fee (City of Union) — 1" meter ($940.00 one-time) and Sewer Connection Fee (City of Union) ($500.00 one-time).
Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.
View the Full Union Impact Fee Schedule
- Water Tap Fee (City of Union) — 1" meter$940.00 one-timeCity of UnionWater tap fee by meter size, covering the tap and service line to the right-of-way, effective July 1, 2023. Meters above 2 inches are priced by quote. Outside-city customers must sign a water service agreement and restrictive covenant with the city.
- Water System Development Fee (City of Union) — inside city$0.00City of UnionThe water system development fee is $0 inside the city. Outside the city limits it is $1,400 per equivalent residential unit (300 gallons per day), in effect since fiscal year 2026.
- Sewer Connection Fee (City of Union)$500.00 one-timeCity of UnionCommercial, institutional and other nonresidential buildings pay a one-time sewer connection charge of $500 for the first fixture unit or less plus $5 for each additional fixture unit (International Plumbing Code fixture-unit tables), per connection, paid with the building permit. The amount shown is the minimum. Hotels and motels pay $300 for the first bath and $75 for each additional bath.
- Sewer System Development Fee (City of Union) — inside city$0.00City of UnionThe wastewater system development fee is $0 inside the city. Outside the city limits it is $2,800 per equivalent residential unit (300 gallons per day), in effect since fiscal year 2026.
- City Impact Fee (City of Union, Office)$0.00City of Union
- $0.00
Where in Union County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 25,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Union Impact Fee Calculator
Estimate impact fees for your project. Set to single-family. Drop a pin or search an address for site-specific fees.
Location
Select a location to begin
Once you select an address or drop a pin, we'll identify the responsible city and county and generate a fee breakdown.
How Development Impact Fees Work in South Carolina
South Carolina counties and municipalities assess development impact fees under the Development Impact Fee Act (S.C. Code 6-1-910 et seq.). Only a government with a comprehensive plan (or a capital improvements plan that substantially complies with the Act) may impose one, by an ordinance approved by a positive majority, and before charging residential units it must report how the fee affects the availability of affordable housing.
Fees may fund only the public facilities the Act lists: water and wastewater, solid waste, roads and bridges, stormwater and flood control, public safety (law enforcement, fire, emergency medical and street lighting), capital equipment and vehicles of at least $100,000 a unit, parks, libraries and recreation, and, since 2016, K-12 public school facilities. A fee may not exceed the development's proportionate share of the cost, after credits for land, money or improvements the developer contributes and for other funding sources.
Fee revenue is kept in interest-bearing accounts by category and service area and spent only on that category in that area. A fee not spent within three years of the date it was scheduled to be spent, or paid on a building permit that is denied, is refunded with its share of interest. The fee is due no earlier than the building permit (or the development permit where no building permit is needed).
Water and sewer charges usually come from the utility that serves a parcel: the Act's definition of an impact fee excludes connection or hookup charges, and a water or wastewater provider meeting the conditions of 6-1-1080 sets its impact fees outside the Act. That is why totals differ between a city, its neighbors and the unincorporated county around it.
For a primer on how impact fees work, see our plain-English guide.
Summary current as of November 2026. This is an editorial summary, not legal advice; see the official statute text and our terms of use.
Union Impact Fee FAQs
What are the total impact fees for a single-family home in Union, South Carolina?
A new single-family home in Union pays $1,020.00 per unit in combined impact fees (rates sourced November 14, 2026).
How much are commercial impact fees in Union?
Commercial development in Union pays no per-square-foot impact fees, but owes $1,440.00 in one-time water and sewer connection fees (assuming a 1-inch meter).
Does Union charge its own impact fees?
Yes. Union levies its own municipal impact or utility fees. Union County does not currently add county-level impact fees inside Union. The schedule on this page shows every fee that applies to development in Union.
Can a South Carolina impact fee be raised after it is adopted?
Only through a new ordinance. Under S.C. Code 6-1-940 the government is bound by the amount its impact fee ordinance sets for each unit of development and may not charge higher or additional impact fees for the same purpose unless the project's service units increase or its scope changes, and then only for the added share. Water and sewer capacity and tap fees set by utilities follow each provider's own rate process.
Fee amounts on this page are compiled from official published schedules and are provided for planning purposes only. Rates change, and project specifics (unit size, meter size, location within special districts) can alter what applies. Always verify current fees with the jurisdiction and utility before relying on them.
Compare unincorporated rates and every other city on the Union County impact fees page.