Brooksville impact fees by project type
Brooksville: Single-Family Impact Fees
A new single-family home in Brooksville pays $16,039.00 per unit in impact fees (rates sourced August 5, 2026). Of that, Hernando County-levied fees account for $6,405.00 and municipal or utility fees for $9,634.00.
The largest line items are Sewer Connection Fee (City of Brooksville) ($6,467.00), City Impact Fee (City of Brooksville) ($2,402.00) and Water Connection Fee (City of Brooksville) ($765.00).
County Impact Fee (Brooksville) is shown at the last published amount but has not been confirmed with the jurisdiction; it is included in the totals here. Verify before budgeting.
View the full Brooksville impact fee schedule
- Water Connection Fee (City of Brooksville)$765.00City of Brooksville Utilities DepartmentThe City of Brooksville charges a water connection fee of $765 per residential dwelling unit, set by the city council's 2025 annual fee resolution. Water meter deposit and meter installation charges are billed separately, as are any permitting or impact fees.
- Sewer Connection Fee (City of Brooksville)$6,467.00City of Brooksville Utilities DepartmentThe City of Brooksville charges a wastewater connection fee of $6,467 per residential dwelling unit, set by the city council's 2025 annual fee resolution. A separate wastewater tap installation charge of $1,260 applies for a residential service installation, and more where boring is required.
- City Impact Fee (City of Brooksville)$2,402.00City of BrooksvilleCity of Brooksville municipal impact fee for a single-family home (~2,000 sq ft): $2,402 per dwelling unit under Code Sec. 50-13 (Ord. 955, effective January 9, 2023). Comprises Fire Rescue $245, Public Buildings $467, Parks & Recreation $676, and Multi-Modal (transportation) $1,014. Based on the 2022 Brooksville Municipal Impact Fee Study. This city fee is in addition to Hernando County impact fees collected on city-issued permits.
- County Impact Fee (Brooksville)$6,405.00Requires confirmationEstimated Hernando County impact fee collected on City of Brooksville single-family permits: approximately $6,405 per dwelling unit (Phase 2, effective December 2, 2025). County impact fees are collected on city-issued permits. Because the City of Brooksville is its own fire benefit district and levies its own $2,402 Ch. 50 municipal impact fee covering Fire, Parks, Roads and Public Buildings, this figure reflects the county collecting only Educational Facilities $6,135, Library $107, Law Enforcement $156 and Jail $7 inside the city. This county fee is in addition to the city's own $2,402 fee.
Where in Hernando County are you building?
Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Brooksville: Multifamily Impact Fees
A new multifamily unit in Brooksville pays $8,565.00 per unit in impact fees (rates sourced August 5, 2026). Of that, Hernando County-levied fees account for $4,046.00 and municipal or utility fees for $4,519.00.
The largest line items are Sewer Connection Fee (City of Brooksville, MF) ($4,041.00) and Water Connection Fee (City of Brooksville, MF) ($478.00).
County Impact Fee — Mid/High Rise 3+ Stories (Brooksville, MF) is shown at the last published amount but has not been confirmed with the jurisdiction; it is included in the totals here. Verify before budgeting.
Some fees are tiered by unit size or building type; amounts reflect the representative tier noted in the schedule below.
View the full Brooksville impact fee schedule
- Water Connection Fee (City of Brooksville, MF)$478.00City of Brooksville Utilities DepartmentThe City of Brooksville charges a water connection fee of $478 per dwelling unit for master-metered residential service, the rate that applies to apartment and condominium buildings. Individually metered dwelling units pay $765. These amounts come from the city council's 2025 annual fee resolution, and meter deposit and installation charges are billed separately.
- Sewer Connection Fee (City of Brooksville, MF)$4,041.00City of Brooksville Utilities DepartmentThe City of Brooksville charges a wastewater connection fee of $4,041 per dwelling unit for master-metered residential service, the rate that applies to apartment and condominium buildings. Individually metered dwelling units pay the higher single-family rate. These amounts come from the city council's 2025 annual fee resolution.
- City Impact Fee (City of Brooksville, MF)$0.00City of BrooksvilleThe City of Brooksville's adopted impact fee schedule, in effect since 2023, sets fees for four land uses only — single-family residential, light industrial, office, and retail. It contains no multifamily category, so the city publishes no multifamily impact fee amount. Hernando County impact fees are a separate charge and do apply to permits issued inside the city.
- County Impact Fee — Mid/High Rise 3+ Stories (Brooksville, MF)$4,046.00Requires confirmationEstimated Hernando County impact fee collected on City of Brooksville multifamily permits (mid/high-rise, 3+ stories): approximately $4,046 per dwelling unit (Phase 2, effective December 2, 2025). Because the City of Brooksville is its own fire benefit district and levies its own municipal impact fee covering Fire, Parks, Roads and Public Buildings, this figure reflects the county collecting only Educational Facilities $3,846, Library $81, Law Enforcement $114 and Jail $5 inside the city. In addition to the city's own multifamily impact fee. This is the default multifamily tier (a typical 4-story building).
Where in Hernando County are you building?
Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Brooksville: Commercial Impact Fees
Commercial development in Brooksville pays $9.87 per square foot in impact fees (rates sourced August 5, 2026).
For a 50,000 sq ft building, that comes to at least $493,550.00. The calculator below adjusts to your exact square footage.
The largest line items are City Impact Fee (City of Brooksville, Commercial) ($2.61/sq ft).
County Impact Fee (Brooksville, Commercial) is shown at the last published amount but has not been confirmed with the jurisdiction; it is included in the totals here. Verify before budgeting.
Sewer Impact Fee (City of Brooksville) and Water Impact Fee (City of Brooksville) are set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; they are not included as dollar figures here.
View the full Brooksville impact fee schedule
- Water Impact Fee (City of Brooksville)Requires confirmationCity of Brooksville Utilities DepartmentLevied on an equivalent-residential-unit basis (fixture-unit count ÷ 24 × the per-ERU rate set by City Council resolution under Code §86-281). The current per-ERU rate is not publicly posted; installation/hook-up charges are billed separately and are additional.
- Sewer Impact Fee (City of Brooksville)Requires confirmationCity of Brooksville Utilities DepartmentLevied on an equivalent-residential-unit basis (fixture-unit count ÷ 24 × the per-ERU rate set by City Council resolution under Code §86-281). The current per-ERU rate is not publicly posted; installation/hook-up charges are billed separately and are additional.
- City Impact Fee (City of Brooksville, Commercial)$2.61/sq ftCity of BrooksvilleRate effective January 9, 2023 (Ord. 955), per 1,000 sq ft. Hernando County impact fees apply within the city in addition to this fee — the two stack, with no city offset.
- County Impact Fee (Brooksville, Commercial)$7.26/sq ftRequires confirmationHernando CountyHernando County impact fees apply within the City of Brooksville and stack on top of the city's own impact fees. Rate effective December 2, 2025 (Ord. 2024-10). Excludes the in-city fire component, which is administered separately by the City of Brooksville fire benefit district.
Where in Hernando County are you building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Brooksville: Industrial Impact Fees
Industrial development in Brooksville pays $2.83 per square foot in impact fees (rates sourced August 5, 2026).
For a 50,000 sq ft building, that comes to at least $141,450.00. The calculator below adjusts to your exact square footage.
The largest line items are City Impact Fee (City of Brooksville, Industrial) ($0.68/sq ft).
County Impact Fee (Brooksville, Industrial) is shown at the last published amount but has not been confirmed with the jurisdiction; it is included in the totals here. Verify before budgeting.
Sewer Impact Fee (City of Brooksville) and Water Impact Fee (City of Brooksville) are set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; they are not included as dollar figures here.
View the full Brooksville impact fee schedule
- Water Impact Fee (City of Brooksville)Requires confirmationCity of Brooksville Utilities DepartmentLevied on an equivalent-residential-unit basis (fixture-unit count ÷ 24 × the per-ERU rate set by City Council resolution under Code §86-281). The current per-ERU rate is not publicly posted; installation/hook-up charges are billed separately and are additional.
- Sewer Impact Fee (City of Brooksville)Requires confirmationCity of Brooksville Utilities DepartmentLevied on an equivalent-residential-unit basis (fixture-unit count ÷ 24 × the per-ERU rate set by City Council resolution under Code §86-281). The current per-ERU rate is not publicly posted; installation/hook-up charges are billed separately and are additional.
- City Impact Fee (City of Brooksville, Industrial)$0.68/sq ftCity of BrooksvilleRate effective January 9, 2023 (Ord. 955), per 1,000 sq ft. Hernando County impact fees apply within the city in addition to this fee — the two stack, with no city offset.
- County Impact Fee (Brooksville, Industrial)$2.15/sq ftRequires confirmationHernando CountyHernando County impact fees apply within the City of Brooksville and stack on top of the city's own impact fees. Rate effective December 2, 2025 (Ord. 2024-10). Excludes the in-city fire component, which is administered separately by the City of Brooksville fire benefit district.
Where in Hernando County are you building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Brooksville: Office Impact Fees
Office development in Brooksville pays $6.22 per square foot in impact fees (rates sourced August 5, 2026).
For a 25,000 sq ft building, that comes to at least $155,425.00. The calculator below adjusts to your exact square footage.
The largest line items are City Impact Fee (City of Brooksville, Office) ($1.48/sq ft).
County Impact Fee (Brooksville, Office) is shown at the last published amount but has not been confirmed with the jurisdiction; it is included in the totals here. Verify before budgeting.
Sewer Impact Fee (City of Brooksville) and Water Impact Fee (City of Brooksville) are set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; they are not included as dollar figures here.
View the full Brooksville impact fee schedule
- Water Impact Fee (City of Brooksville)Requires confirmationCity of Brooksville Utilities DepartmentLevied on an equivalent-residential-unit basis (fixture-unit count ÷ 24 × the per-ERU rate set by City Council resolution under Code §86-281). The current per-ERU rate is not publicly posted; installation/hook-up charges are billed separately and are additional.
- Sewer Impact Fee (City of Brooksville)Requires confirmationCity of Brooksville Utilities DepartmentLevied on an equivalent-residential-unit basis (fixture-unit count ÷ 24 × the per-ERU rate set by City Council resolution under Code §86-281). The current per-ERU rate is not publicly posted; installation/hook-up charges are billed separately and are additional.
- City Impact Fee (City of Brooksville, Office)$1.48/sq ftCity of BrooksvilleRate effective January 9, 2023 (Ord. 955), per 1,000 sq ft. Hernando County impact fees apply within the city in addition to this fee — the two stack, with no city offset.
- County Impact Fee (Brooksville, Office)$4.74/sq ftRequires confirmationHernando CountyHernando County impact fees apply within the City of Brooksville and stack on top of the city's own impact fees. Rate effective December 2, 2025 (Ord. 2024-10). Excludes the in-city fire component, which is administered separately by the City of Brooksville fire benefit district.
Where in Hernando County are you building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 25,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Brooksville impact fee calculator
Estimate impact fees for your project. Set to single-family. Drop a pin or search an address for site-specific fees.
Location
Select a location to begin
Once you select an address or drop a pin, we'll identify the responsible city and county and generate a fee breakdown.
How impact fees work in Florida
Florida impact fees are one-time charges on new development, governed by Section 163.31801, Florida Statutes (the Florida Impact Fee Act). The statute requires fees to be based on the most recent and localized data, spent on the infrastructure category they were collected for, and adopted by ordinance.
Since 2021, the law also limits how fast fees can rise: increases up to 25% phase in over two years, increases of 25–50% phase in over four years, and increases above 50% are allowed only with a demonstrated extraordinary-circumstances study and at least a two-thirds vote of the governing body.
Counties and cities can both levy impact fees. Inside an incorporated city, a project typically pays the county's countywide fees plus any municipal fees the city has adopted, which is why totals differ between a city and the unincorporated county around it.
Brush up on impact fee basics before you budget your next project.
Brooksville impact fee FAQs
What are the total impact fees for a single-family home in Brooksville, Florida?
A new single-family home in Brooksville pays $16,039.00 per unit in combined impact fees (rates sourced August 5, 2026). This figure includes amounts that have not been confirmed with the jurisdiction; verify before budgeting.
How much are commercial impact fees in Brooksville?
Commercial development in Brooksville pays $9.87 per square foot in impact fees, at least $493,550.00 for a 50,000 sq ft building. This figure includes amounts that have not been confirmed and excludes fees with no published standard amount, so the full cost may be higher; verify before budgeting.
Does Brooksville charge its own impact fees?
Yes. Brooksville levies its own municipal impact or utility fees, and county-levied fees also apply inside city limits. The schedule on this page shows every fee that applies to development in Brooksville, with the combined total.
Can Florida impact fees increase at any time?
No. Section 163.31801, Florida Statutes limits increases to 50% at most, phased in over two to four years, unless the local government makes extraordinary-circumstances findings and approves the increase by at least a two-thirds vote.
Fee amounts on this page are compiled from official published schedules and are provided for planning purposes only. Rates change, and project specifics (unit size, meter size, location within special districts) can alter what applies. Always verify current fees with the jurisdiction and utility before relying on them.
Compare unincorporated rates and every other city on the Hernando County impact fees page.