Skip to content
IMPACTFEES.ORG

Ulmer, South Carolina Impact Fees

Ulmer applies its own fee schedule. Allendale County does not currently add county-level impact fees inside city limits. There are currently no published impact fee amounts for a new single-family home (rates sourced ). The full breakdown is below.

Ulmer Impact Fees by Project Type

Ulmer: Single-Family Impact Fees

Ulmer has no published impact fee amounts for a new single-family home (rates sourced August 13, 2026). The schedule below documents the status of each fee.

Water Tap / Connection Fee (Town of Ulmer) is set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.

View the Full Ulmer Impact Fee Schedule
Water$0.00
  • Water Tap / Connection Fee (Town of Ulmer)
    Town of Ulmer
    The Town of Ulmer operates its own small water system. The town sets its water tap fee by council action and publishes no tap fee schedule, so no amount is shown here.
    Requires confirmation
Sewer$0.00
  • Sewer Tap / Connection Fee (Town of Ulmer)
    Town of Ulmer
    The Town of Ulmer has no municipal sewer system, so there is no sewer tap fee. The state Rural Infrastructure Authority's municipal rate survey lists Ulmer as a water-only provider, and no county or district wastewater utility serves the town; homes in Ulmer use on-site septic systems permitted through the state.
    $0.00
City$0.00
  • City Impact / Development Fees (Town of Ulmer)
    Town of Ulmer
    The Town of Ulmer does not charge a city development impact fee. South Carolina law allows impact fees only under the state Development Impact Fee Act, which requires a comprehensive plan, a formal fee study and an adopting ordinance; only about two dozen South Carolina local governments have adopted one, and Ulmer is not among them.
    $0.00
County$0.00
Total (Ulmer): $0.00
Sources last checked Official fee schedules:Town of Ulmer Allendale County
Fees flagged "Requires confirmation" have no confirmed published amount. Confirm them with the jurisdiction or utility before budgeting.

Where in Allendale County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Ulmer: Multifamily Impact Fees

Ulmer has no published impact fee amounts for a new multifamily unit (rates sourced August 13, 2026). The schedule below documents the status of each fee.

Water Tap / Connection Fee (Town of Ulmer, MF) is set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.

View the Full Ulmer Impact Fee Schedule
Water$0.00
  • Water Tap / Connection Fee (Town of Ulmer, MF)
    Town of Ulmer
    The Town of Ulmer operates its own small water system. The town sets its water tap fee by council action and publishes no tap fee schedule or multifamily basis, so no amount is shown here.
    Requires confirmation
Sewer$0.00
  • Sewer Tap / Connection Fee (Town of Ulmer, MF)
    Town of Ulmer
    The Town of Ulmer has no municipal sewer system, so there is no sewer tap fee for multifamily projects. The state Rural Infrastructure Authority's municipal rate survey lists Ulmer as a water-only provider; development in Ulmer relies on on-site septic or other state-permitted wastewater systems.
    $0.00
City$0.00
  • City Impact / Development Fees (Town of Ulmer, MF)
    Town of Ulmer
    The Town of Ulmer does not charge a city development impact fee on multifamily construction. South Carolina law allows impact fees only under the state Development Impact Fee Act, which requires a comprehensive plan, a formal fee study and an adopting ordinance; only about two dozen South Carolina local governments have adopted one, and Ulmer is not among them.
    $0.00
County$0.00
Total (Ulmer): $0.00
Sources last checked Official fee schedules:Town of Ulmer Allendale County
Fees flagged "Requires confirmation" have no confirmed published amount. Confirm them with the jurisdiction or utility before budgeting.

Where in Allendale County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Ulmer: Commercial Impact Fees

Commercial development in Ulmer pays no per-square-foot impact fees (rates sourced August 13, 2026).

Water Tap / Connection Fee (Town of Ulmer) is set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.

View the Full Ulmer Impact Fee Schedule
Water$0.00
  • Water Tap / Connection Fee (Town of Ulmer)
    Town of Ulmer
    The Town of Ulmer provides its own water service (water only); no nonresidential connection fee is published (set by council resolution).
    Requires confirmation
Sewer$0.00
City$0.00
County$0.00
Total (Ulmer): $0.00
Sources last checked Official fee schedules:Town of Ulmer Allendale County
Fees flagged "Requires confirmation" have no confirmed published amount. Confirm them with the jurisdiction or utility before budgeting.

Where in Allendale County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Ulmer: Industrial Impact Fees

Industrial development in Ulmer pays no per-square-foot impact fees (rates sourced August 13, 2026).

Water Tap / Connection Fee (Town of Ulmer) is set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.

View the Full Ulmer Impact Fee Schedule
Water$0.00
  • Water Tap / Connection Fee (Town of Ulmer)
    Town of Ulmer
    The Town of Ulmer provides its own water service (water only); no nonresidential connection fee is published (set by council resolution).
    Requires confirmation
Sewer$0.00
City$0.00
County$0.00
Total (Ulmer): $0.00
Sources last checked Official fee schedules:Town of Ulmer Allendale County
Fees flagged "Requires confirmation" have no confirmed published amount. Confirm them with the jurisdiction or utility before budgeting.

Where in Allendale County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Ulmer: Office Impact Fees

Office development in Ulmer pays no per-square-foot impact fees (rates sourced August 13, 2026).

Water Tap / Connection Fee (Town of Ulmer) is set by the utility and not published online. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.

View the Full Ulmer Impact Fee Schedule
Water$0.00
  • Water Tap / Connection Fee (Town of Ulmer)
    Town of Ulmer
    The Town of Ulmer provides its own water service (water only); no nonresidential connection fee is published (set by council resolution).
    Requires confirmation
Sewer$0.00
City$0.00
County$0.00
Total (Ulmer): $0.00
Sources last checked Official fee schedules:Town of Ulmer Allendale County
Fees flagged "Requires confirmation" have no confirmed published amount. Confirm them with the jurisdiction or utility before budgeting.

Where in Allendale County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 25,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Ulmer Impact Fee Calculator

Estimate impact fees for your project. Set to single-family. Drop a pin or search an address for site-specific fees.

Location

Select a location to begin

Once you select an address or drop a pin, we'll identify the responsible city and county and generate a fee breakdown.

Water & Sewer
Transportation
Parks
Schools
Fire & Police
General

How Development Impact Fees Work in South Carolina

South Carolina counties and municipalities assess development impact fees under the Development Impact Fee Act (S.C. Code 6-1-910 et seq.). Only a government with a comprehensive plan (or a capital improvements plan that substantially complies with the Act) may impose one, by an ordinance approved by a positive majority, and before charging residential units it must report how the fee affects the availability of affordable housing.

Fees may fund only the public facilities the Act lists: water and wastewater, solid waste, roads and bridges, stormwater and flood control, public safety (law enforcement, fire, emergency medical and street lighting), capital equipment and vehicles of at least $100,000 a unit, parks, libraries and recreation, and, since 2016, K-12 public school facilities. A fee may not exceed the development's proportionate share of the cost, after credits for land, money or improvements the developer contributes and for other funding sources.

Fee revenue is kept in interest-bearing accounts by category and service area and spent only on that category in that area. A fee not spent within three years of the date it was scheduled to be spent, or paid on a building permit that is denied, is refunded with its share of interest. The fee is due no earlier than the building permit (or the development permit where no building permit is needed).

Water and sewer charges usually come from the utility that serves a parcel: the Act's definition of an impact fee excludes connection or hookup charges, and a water or wastewater provider meeting the conditions of 6-1-1080 sets its impact fees outside the Act. That is why totals differ between a city, its neighbors and the unincorporated county around it.

If you're still asking what are impact fees, start with our guide to the definition, common categories, and legal basis.

Summary current as of November 2026. This is an editorial summary, not legal advice; see the official statute text and our terms of use.

Ulmer Impact Fee FAQs

How much are commercial impact fees in Ulmer?

Ulmer does not currently levy impact fees on commercial development.

Does Ulmer charge its own impact fees?

Yes. Ulmer levies its own municipal impact or utility fees. Allendale County does not currently add county-level impact fees inside Ulmer. The schedule on this page shows every fee that applies to development in Ulmer.

Can a South Carolina impact fee be raised after it is adopted?

Only through a new ordinance. Under S.C. Code 6-1-940 the government is bound by the amount its impact fee ordinance sets for each unit of development and may not charge higher or additional impact fees for the same purpose unless the project's service units increase or its scope changes, and then only for the added share. Water and sewer capacity and tap fees set by utilities follow each provider's own rate process.

Fee amounts on this page are compiled from official published schedules and are provided for planning purposes only. Rates change, and project specifics (unit size, meter size, location within special districts) can alter what applies. Always verify current fees with the jurisdiction and utility before relying on them.

Compare unincorporated rates and every other city on the Allendale County impact fees page.

Missing a jurisdiction? Get in touch.

Request coverage for a city or county, report an issue, ask about enterprise access, or inquire about sponsorship opportunities. We typically reply within one business day.

0/1000