Jamestown Impact Fees by Project Type
Jamestown: Single-Family Impact Fees
A new single-family home in Jamestown pays at least $800.00 per unit in impact fees (rates sourced August 14, 2026). Every line item is levied at the municipal or utility level.
The largest line items are Water Tap Fee (Town of Jamestown) ($800.00).
City Development Impact Fee (Town of Jamestown) is set by the city and has no published standard rate. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.
View the Full Jamestown Impact Fee Schedule
- Water Tap Fee (Town of Jamestown)$800.00Town of JamestownThe Town of Jamestown charges an $800 water tap-in fee for a new residential customer requiring a new water meter, plus a $50 deposit. Where a meter is already in place, the residential tap-in fee is $200. Connections on the opposite side of the road from the water main incur additional boring costs.
- Sewer Tap/Impact Fee (Town of Jamestown)$0.00Town of JamestownThe Town of Jamestown operates a water system only and has no municipal sewer system, so it levies no sewer tap or sewer impact fee. The town's published utility charges cover water tap-in fees and monthly water service only.
- City Development Impact Fee (Town of Jamestown)Requires confirmationTown of Jamestown
- County Development Impact Fee (Berkeley County)$0.00Berkeley CountyBerkeley County does not levy a development impact fee. The county's adopted development fee schedule contains only review, inspection and administrative fees.
Where in Berkeley County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Jamestown: Multifamily Impact Fees
Jamestown has no published impact fee amounts for a new multifamily unit (rates sourced August 14, 2026). The schedule below documents the status of each fee.
Water Tap Fee (Town of Jamestown, MF) is set by the utility and not published online. City Development Impact Fee (Town of Jamestown, MF) is set by the city and has no published standard rate. Contact the levying jurisdiction or utility to verify before budgeting; they are not included as dollar figures here.
View the Full Jamestown Impact Fee Schedule
- Water Tap Fee (Town of Jamestown, MF)Requires confirmationTown of JamestownThe Town of Jamestown sets water tap-in fees by customer class rather than per dwelling unit: a new residential customer needing a new meter pays $800 plus a $50 deposit ($200 where a meter is already in place), and a commercial customer pays $2,000 for a new meter. The town publishes no multifamily tap rate.
- Sewer Tap/Impact Fee (Town of Jamestown, MF)$0.00Town of JamestownThe Town of Jamestown operates a water system only and has no municipal sewer system, so no sewer tap or sewer impact fee applies to multifamily or any other development. The town's published utility charges cover water tap-in fees and monthly water service only.
- City Development Impact Fee (Town of Jamestown, MF)Requires confirmationTown of Jamestown
- County Development Impact Fee (Berkeley County, MF)$0.00Berkeley CountyBerkeley County does not levy a development impact fee. The county's adopted development fee schedule contains only review, inspection and administrative fees.
Where in Berkeley County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Jamestown: Commercial Impact Fees
Commercial development in Jamestown pays no per-square-foot impact fees, but owes $2,000.00 in one-time water and sewer connection fees (rates sourced August 14, 2026).
For a 50,000 sq ft building, that comes to at least $2,000.00. The calculator below adjusts to your exact square footage.
The largest line items are Water Tap-in Fee (Town of Jamestown) — new meter ($2,000.00 one-time).
Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.
City Development Impact Fee (Town of Jamestown, Commercial) is set by the city and has no published standard rate. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.
View the Full Jamestown Impact Fee Schedule
- Water Tap-in Fee (Town of Jamestown) — new meter$2,000.00 one-timeTown of Jamestown water tap-in fee for a new commercial customer requiring a new meter: $2,000 plus a $50 deposit ($600 where an existing meter is reused). The town operates a water system only. Additional boring costs apply if the connection is on the opposite side of the road from the main.
- Sewer Fee (Town of Jamestown)$0.00The Town of Jamestown operates a water system only; there is no municipal sewer service (properties use septic), so no sewer connection or impact fee applies.
- Requires confirmation
- County Development Impact Fee (Berkeley County, Commercial)$0.00Berkeley County terminated its development impact fee program in 2014; the county levies no development impact fees.
Where in Berkeley County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Jamestown: Industrial Impact Fees
Industrial development in Jamestown pays no per-square-foot impact fees, but owes $2,000.00 in one-time water and sewer connection fees (rates sourced August 14, 2026).
For a 50,000 sq ft building, that comes to at least $2,000.00. The calculator below adjusts to your exact square footage.
The largest line items are Water Tap-in Fee (Town of Jamestown) — new meter ($2,000.00 one-time).
Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.
City Development Impact Fee (Town of Jamestown, Industrial) is set by the city and has no published standard rate. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.
View the Full Jamestown Impact Fee Schedule
- Water Tap-in Fee (Town of Jamestown) — new meter$2,000.00 one-timeTown of Jamestown water tap-in fee for a new commercial customer requiring a new meter: $2,000 plus a $50 deposit ($600 where an existing meter is reused). The town operates a water system only. Additional boring costs apply if the connection is on the opposite side of the road from the main.
- Sewer Fee (Town of Jamestown)$0.00The Town of Jamestown operates a water system only; there is no municipal sewer service (properties use septic), so no sewer connection or impact fee applies.
- Requires confirmation
- County Development Impact Fee (Berkeley County, Industrial)$0.00Berkeley County terminated its development impact fee program in 2014; the county levies no development impact fees.
Where in Berkeley County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Jamestown: Office Impact Fees
Office development in Jamestown pays no per-square-foot impact fees, but owes $2,000.00 in one-time water and sewer connection fees (rates sourced August 14, 2026).
For a 25,000 sq ft building, that comes to at least $2,000.00. The calculator below adjusts to your exact square footage.
The largest line items are Water Tap-in Fee (Town of Jamestown) — new meter ($2,000.00 one-time).
Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.
City Development Impact Fee (Town of Jamestown, Office) is set by the city and has no published standard rate. Contact the levying jurisdiction or utility to verify before budgeting; it is not included as a dollar figure here.
View the Full Jamestown Impact Fee Schedule
- Water Tap-in Fee (Town of Jamestown) — new meter$2,000.00 one-timeTown of Jamestown water tap-in fee for a new commercial customer requiring a new meter: $2,000 plus a $50 deposit ($600 where an existing meter is reused). The town operates a water system only. Additional boring costs apply if the connection is on the opposite side of the road from the main.
- Sewer Fee (Town of Jamestown)$0.00The Town of Jamestown operates a water system only; there is no municipal sewer service (properties use septic), so no sewer connection or impact fee applies.
- Requires confirmation
- County Development Impact Fee (Berkeley County, Office)$0.00Berkeley County terminated its development impact fee program in 2014; the county levies no development impact fees.
Where in Berkeley County Are You Building?
Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 25,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.
Jamestown Impact Fee Calculator
Estimate impact fees for your project. Set to single-family. Drop a pin or search an address for site-specific fees.
Location
Select a location to begin
Once you select an address or drop a pin, we'll identify the responsible city and county and generate a fee breakdown.
How Development Impact Fees Work in South Carolina
South Carolina counties and municipalities assess development impact fees under the Development Impact Fee Act (S.C. Code 6-1-910 et seq.). Only a government with a comprehensive plan (or a capital improvements plan that substantially complies with the Act) may impose one, by an ordinance approved by a positive majority, and before charging residential units it must report how the fee affects the availability of affordable housing.
Fees may fund only the public facilities the Act lists: water and wastewater, solid waste, roads and bridges, stormwater and flood control, public safety (law enforcement, fire, emergency medical and street lighting), capital equipment and vehicles of at least $100,000 a unit, parks, libraries and recreation, and, since 2016, K-12 public school facilities. A fee may not exceed the development's proportionate share of the cost, after credits for land, money or improvements the developer contributes and for other funding sources.
Fee revenue is kept in interest-bearing accounts by category and service area and spent only on that category in that area. A fee not spent within three years of the date it was scheduled to be spent, or paid on a building permit that is denied, is refunded with its share of interest. The fee is due no earlier than the building permit (or the development permit where no building permit is needed).
Water and sewer charges usually come from the utility that serves a parcel: the Act's definition of an impact fee excludes connection or hookup charges, and a water or wastewater provider meeting the conditions of 6-1-1080 sets its impact fees outside the Act. That is why totals differ between a city, its neighbors and the unincorporated county around it.
If you're still asking what are impact fees, start with our guide to the definition, common categories, and legal basis.
Summary current as of November 2026. This is an editorial summary, not legal advice; see the official statute text and our terms of use.
Jamestown Impact Fee FAQs
What are the total impact fees for a single-family home in Jamestown, South Carolina?
A new single-family home in Jamestown pays at least $800.00 per unit in combined impact fees (rates sourced August 14, 2026). One additional fee has no published standard amount and is not included, so the full cost may be higher; verify before budgeting.
How much are commercial impact fees in Jamestown?
Commercial development in Jamestown pays no per-square-foot impact fees, but owes $2,000.00 in one-time water and sewer connection fees (assuming a 1-inch meter). One additional fee has no published standard amount and is not included, so the full cost may be higher; verify before budgeting.
Does Jamestown charge its own impact fees?
Yes. Jamestown levies its own municipal impact or utility fees. Berkeley County does not currently add county-level impact fees inside Jamestown. The schedule on this page shows every fee that applies to development in Jamestown.
Can a South Carolina impact fee be raised after it is adopted?
Only through a new ordinance. Under S.C. Code 6-1-940 the government is bound by the amount its impact fee ordinance sets for each unit of development and may not charge higher or additional impact fees for the same purpose unless the project's service units increase or its scope changes, and then only for the added share. Water and sewer capacity and tap fees set by utilities follow each provider's own rate process.
Fee amounts on this page are compiled from official published schedules and are provided for planning purposes only. Rates change, and project specifics (unit size, meter size, location within special districts) can alter what applies. Always verify current fees with the jurisdiction and utility before relying on them.
Compare unincorporated rates and every other city on the Berkeley County impact fees page.