Skip to content
IMPACTFEES.ORG

Timmonsville, South Carolina Impact Fees

Timmonsville applies its own fee schedule. Florence County does not currently add county-level impact fees inside city limits. A new single-family home pays $925.00 per unit (rates sourced ). This figure includes amounts that have not been confirmed with the jurisdiction; verify before budgeting. The full breakdown is below.

Timmonsville Impact Fees by Project Type

Timmonsville: Single-Family Impact Fees

A new single-family home in Timmonsville pays $925.00 per unit in impact fees (rates sourced November 11, 2026). Every line item is levied at the municipal or utility level.

Sewer Tap Fee (City of Florence, Timmonsville service area) — 4" tap and Water Tap Fee (City of Florence, Timmonsville service area) — 5/8" x 3/4" city-installed are shown at the last published amount but have not been confirmed with the jurisdiction; they are included in the totals here. Verify before budgeting.

View the Full Timmonsville Impact Fee Schedule
Water$375.00
  • Water Tap Fee (City of Florence, Timmonsville service area) — 5/8" x 3/4" city-installed
    City of Florence Utilities Department
    The City of Florence has owned and run Timmonsville's water system since 2013 and keeps a separate tap fee table for the Timmonsville service area. The latest published code text sets a 5/8 by 3/4 inch water tap at $375 when the city installs it ($150 when the owner's contractor installs it), with no water capacity charge.
    $375.00Requires confirmation
Sewer$550.00
  • Sewer Tap Fee (City of Florence, Timmonsville service area) — 4" tap
    City of Florence Utilities Department
    Sewer in Timmonsville is provided by the City of Florence. Its code sets a 4 inch sewer tap in the Timmonsville service area at $550 when the city makes the tap, and exempts that area from the per-gallon connection fee charged elsewhere.
    $550.00Requires confirmation
City$0.00
County$0.00
  • County Impact Fee (Florence County)
    Florence County
    Florence County has not adopted a development impact fee under the South Carolina Development Impact Fee Act, and its adopted budget carries no impact fee revenue.
    $0.00
Total (Timmonsville): $925.00
Sources last checked Official fee schedules:City of Florence Utilities Department Town of Timmonsville Florence County
Amounts flagged "Requires confirmation" are the last published figures, included in the totals. Confirm them with the jurisdiction or utility before budgeting.

Where in Florence County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Timmonsville: Multifamily Impact Fees

A new multifamily unit in Timmonsville pays $925.00 per unit in impact fees (rates sourced November 11, 2026). Every line item is levied at the municipal or utility level.

Water Tap Fee (City of Florence, Timmonsville service area, MF) — 5/8" x 3/4" city-installed and Sewer Tap Fee (City of Florence, Timmonsville service area, MF) — 4" tap are shown at the last published amount but have not been confirmed with the jurisdiction; they are included in the totals here. Verify before budgeting.

View the Full Timmonsville Impact Fee Schedule
Water$375.00
  • Water Tap Fee (City of Florence, Timmonsville service area, MF) — 5/8" x 3/4" city-installed
    City of Florence Utilities Department
    The City of Florence, which owns Timmonsville's water system, charges no water capacity charge in the Timmonsville service area. A multifamily building pays only the water tap, priced by meter size rather than per apartment: $375 for a 5/8 by 3/4 inch city-installed meter, paid once for a building on one connection.
    $375.00Requires confirmation
Sewer$550.00
  • Sewer Tap Fee (City of Florence, Timmonsville service area, MF) — 4" tap
    City of Florence Utilities Department
    The City of Florence does not charge its per-gallon sewer connection fee in the Timmonsville service area, so a multifamily building pays only the sewer tap charge, priced by tap size rather than per apartment: $550 for a 4 inch city-made tap, paid once for a building on one connection.
    $550.00Requires confirmation
City$0.00
County$0.00
  • County Impact Fee (Florence County, MF)
    Florence County
    Florence County has not adopted a development impact fee under the South Carolina Development Impact Fee Act, and its adopted budget carries no impact fee revenue.
    $0.00
Total (Timmonsville): $925.00
Sources last checked Official fee schedules:City of Florence Utilities Department Town of Timmonsville Florence County
Amounts flagged "Requires confirmation" are the last published figures, included in the totals. Confirm them with the jurisdiction or utility before budgeting.

Where in Florence County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Timmonsville: Commercial Impact Fees

Commercial development in Timmonsville pays no per-square-foot impact fees, but owes $1,055.00 in one-time water and sewer connection fees (rates sourced November 11, 2026).

For a 50,000 sq ft building, that comes to about $1,055.00. The calculator below adjusts to your exact square footage.

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

Water Tap Fee (City of Florence, Timmonsville service area) — 1" meter, city-installed and Sewer Tap Fee (City of Florence, Timmonsville service area) — 4" tap, city-installed are shown at the last published amount but have not been confirmed with the jurisdiction; they are included in the totals here. Verify before budgeting.

View the Full Timmonsville Impact Fee Schedule
Water$505.00 one-time
  • Water Tap Fee (City of Florence, Timmonsville service area) — 1" meter, city-installed
    1", city-installed
    City of Florence Utilities
    The City of Florence has owned and run Timmonsville's water system since 2013 and keeps a separate tap fee table for the Timmonsville service area: a city-installed 1 inch tap costs $505, and larger meters run from $800 (1-1/2 inch) to $33,930 (6 inch). No per-gallon demand charge applies in this area.
    $505.00 one-timeRequires confirmation
Sewer$550.00 one-time
City$0.00
County$0.00
Total (Timmonsville): $1,055.00 one-time (≈ $1,055.00 at 50,000 sq ft)
Sources last checked Official fee schedules:City of Florence Utilities Town of Timmonsville Florence County
Amounts flagged "Requires confirmation" are the last published figures, included in the totals. Confirm them with the jurisdiction or utility before budgeting.
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Florence County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Timmonsville: Industrial Impact Fees

Industrial development in Timmonsville pays no per-square-foot impact fees, but owes $1,055.00 in one-time water and sewer connection fees (rates sourced November 11, 2026).

For a 50,000 sq ft building, that comes to about $1,055.00. The calculator below adjusts to your exact square footage.

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

Water Tap Fee (City of Florence, Timmonsville service area) — 1" meter, city-installed and Sewer Tap Fee (City of Florence, Timmonsville service area) — 4" tap, city-installed are shown at the last published amount but have not been confirmed with the jurisdiction; they are included in the totals here. Verify before budgeting.

View the Full Timmonsville Impact Fee Schedule
Water$505.00 one-time
  • Water Tap Fee (City of Florence, Timmonsville service area) — 1" meter, city-installed
    1", city-installed
    City of Florence Utilities
    The City of Florence has owned and run Timmonsville's water system since 2013 and keeps a separate tap fee table for the Timmonsville service area: a city-installed 1 inch tap costs $505, and larger meters run from $800 (1-1/2 inch) to $33,930 (6 inch). No per-gallon demand charge applies in this area.
    $505.00 one-timeRequires confirmation
Sewer$550.00 one-time
City$0.00
County$0.00
Total (Timmonsville): $1,055.00 one-time (≈ $1,055.00 at 50,000 sq ft)
Sources last checked Official fee schedules:City of Florence Utilities Town of Timmonsville Florence County
Amounts flagged "Requires confirmation" are the last published figures, included in the totals. Confirm them with the jurisdiction or utility before budgeting.
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Florence County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 50,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Timmonsville: Office Impact Fees

Office development in Timmonsville pays no per-square-foot impact fees, but owes $1,055.00 in one-time water and sewer connection fees (rates sourced November 11, 2026).

For a 25,000 sq ft building, that comes to about $1,055.00. The calculator below adjusts to your exact square footage.

Water and sewer connection fees assume a 1-inch meter; larger services pay more. See the meter-size tiers in the source schedules.

Water Tap Fee (City of Florence, Timmonsville service area) — 1" meter, city-installed and Sewer Tap Fee (City of Florence, Timmonsville service area) — 4" tap, city-installed are shown at the last published amount but have not been confirmed with the jurisdiction; they are included in the totals here. Verify before budgeting.

View the Full Timmonsville Impact Fee Schedule
Water$505.00 one-time
  • Water Tap Fee (City of Florence, Timmonsville service area) — 1" meter, city-installed
    1", city-installed
    City of Florence Utilities
    The City of Florence has owned and run Timmonsville's water system since 2013 and keeps a separate tap fee table for the Timmonsville service area: a city-installed 1 inch tap costs $505, and larger meters run from $800 (1-1/2 inch) to $33,930 (6 inch). No per-gallon demand charge applies in this area.
    $505.00 one-timeRequires confirmation
Sewer$550.00 one-time
City$0.00
County$0.00
  • County Impact Fee (Florence County, Office)
    Florence County
    Florence County has not adopted a development impact fee under the South Carolina Development Impact Fee Act, and its adopted budget carries no impact fee revenue.
    $0.00
Total (Timmonsville): $1,055.00 one-time (≈ $1,055.00 at 25,000 sq ft)
Sources last checked Official fee schedules:City of Florence Utilities Town of Timmonsville Florence County
Amounts flagged "Requires confirmation" are the last published figures, included in the totals. Confirm them with the jurisdiction or utility before budgeting.
Water/sewer connection fees assume a 1-inch meter; larger services pay more.

Where in Florence County Are You Building?

Each jurisdiction applies its own fee schedule. Pick yours. Totals shown are for a 25,000 sq ft building, including one-time water/sewer fees (assuming a 1-inch meter). * = one-time water/sewer connection charges only; no per-sq-ft impact fee schedule sourced for that jurisdiction. = one or more fees are unconfirmed or have no published amount; the figure shown may not be the complete cost.

Timmonsville Impact Fee Calculator

Estimate impact fees for your project. Set to single-family. Drop a pin or search an address for site-specific fees.

Location

Select a location to begin

Once you select an address or drop a pin, we'll identify the responsible city and county and generate a fee breakdown.

Water & Sewer
Transportation
Parks
Schools
Fire & Police
General

How Development Impact Fees Work in South Carolina

South Carolina counties and municipalities assess development impact fees under the Development Impact Fee Act (S.C. Code 6-1-910 et seq.). Only a government with a comprehensive plan (or a capital improvements plan that substantially complies with the Act) may impose one, by an ordinance approved by a positive majority, and before charging residential units it must report how the fee affects the availability of affordable housing.

Fees may fund only the public facilities the Act lists: water and wastewater, solid waste, roads and bridges, stormwater and flood control, public safety (law enforcement, fire, emergency medical and street lighting), capital equipment and vehicles of at least $100,000 a unit, parks, libraries and recreation, and, since 2016, K-12 public school facilities. A fee may not exceed the development's proportionate share of the cost, after credits for land, money or improvements the developer contributes and for other funding sources.

Fee revenue is kept in interest-bearing accounts by category and service area and spent only on that category in that area. A fee not spent within three years of the date it was scheduled to be spent, or paid on a building permit that is denied, is refunded with its share of interest. The fee is due no earlier than the building permit (or the development permit where no building permit is needed).

Water and sewer charges usually come from the utility that serves a parcel: the Act's definition of an impact fee excludes connection or hookup charges, and a water or wastewater provider meeting the conditions of 6-1-1080 sets its impact fees outside the Act. That is why totals differ between a city, its neighbors and the unincorporated county around it.

If you're still asking what are impact fees, start with our guide to the definition, common categories, and legal basis.

Summary current as of November 2026. This is an editorial summary, not legal advice; see the official statute text and our terms of use.

Timmonsville Impact Fee FAQs

What are the total impact fees for a single-family home in Timmonsville, South Carolina?

A new single-family home in Timmonsville pays $925.00 per unit in combined impact fees (rates sourced November 11, 2026). This figure includes amounts that have not been confirmed with the jurisdiction; verify before budgeting.

How much are commercial impact fees in Timmonsville?

Commercial development in Timmonsville pays no per-square-foot impact fees, but owes $1,055.00 in one-time water and sewer connection fees (assuming a 1-inch meter). This figure includes amounts that have not been confirmed with the jurisdiction; verify before budgeting.

Does Timmonsville charge its own impact fees?

Yes. Timmonsville levies its own municipal impact or utility fees. Florence County does not currently add county-level impact fees inside Timmonsville. The schedule on this page shows every fee that applies to development in Timmonsville.

Can a South Carolina impact fee be raised after it is adopted?

Only through a new ordinance. Under S.C. Code 6-1-940 the government is bound by the amount its impact fee ordinance sets for each unit of development and may not charge higher or additional impact fees for the same purpose unless the project's service units increase or its scope changes, and then only for the added share. Water and sewer capacity and tap fees set by utilities follow each provider's own rate process.

Fee amounts on this page are compiled from official published schedules and are provided for planning purposes only. Rates change, and project specifics (unit size, meter size, location within special districts) can alter what applies. Always verify current fees with the jurisdiction and utility before relying on them.

Compare unincorporated rates and every other city on the Florence County impact fees page.

Missing a jurisdiction? Get in touch.

Request coverage for a city or county, report an issue, ask about enterprise access, or inquire about sponsorship opportunities. We typically reply within one business day.

0/1000